6200 DUCTILE IRON (F5)
PN 10 – 16 DN50–DN600
PRODUCTION STANDARDS
| Design | TS EN 1171 |
| End Connection | FLANGED TS EN 1092-2 / ISO 7005-2 |
| Face to Face | TS EN 558 Seri 15 / DIN 3202 F5 |
| Test | TS EN 12266-1 |
| Marking |
TS EN 19 |
FEATURES
• FAF6200 PN10/16 Resilient Seated Gate Valve is operating by the EPDM covered iron wedge moving perpendicular to the flow axis through a worm machined stem multi turned
• %100 tight sealing is achieved through EPDM covered wedge fully contacting the fusion bonded epoxy coated flow surface
• In each time the valve is opened, the flow on the line cleans the sealing surface, prevents from dirt and deposits
• The design standard of the valve dimension is according to DIN3202 F5
• It has ductile iron body and stainless steel stem
• Inner and outer surfaces are coated with minimum 250 microns fusion bonded epoxy
• Suitable to install actuator and gearbox
• Suitable to use with ground and underground applications. Can be operated with extension spindle
• Very low head loss rating. Can be operated with lower torque ratings, no maintenance needed
APPLICATIONS
-
Hot Water, Cold Water, Fluids without acidity or alkalinity properties
TEMPERATURE