1400 PN40 – FLANGED
PN40 DN15 — DN150
PRODUCTION STANDARDS
| Design | TS 9809 / TS EN 331 |
| End Connection
|
FLANGED TS EN 1092-2 / ISO 7005-2 |
| Face to Face | TS 9809 Föy5 / TS EN 331
DN15. DN125 = TS EN 558 Seri 1 / DIN3202 F1 DN150 = TS EN 558 Seri 28 / DIN3202 F7 |
| Test | TS EN 12266-1 / TS 9809 / TS EN 331 |
| Marking | TS EN 19 / TS EN 331 / TS 9809 |
FEATURES
• FAF 1400, PN 16 flanged ball valve is operating by a ball having a hole with the same size as the flow section, through the help of the stem, rotating quarter turn(90 degree) between teflon seats where the ball to be parallel or perpendicular to the flow axis
• Can be installed bidirectional
• Through the stainless steel belleville spring reinforced teflon (PTFE) seats, %100 tight sealing is achieved in lowest and highest pressure ratings
• The well accordance of teflon material with various flow types and its resistance to higher temperatures enables it to be used in wide range of applications
• It has stainless steel ball and ductile iron body
• It is appropriate to be used in fully open or fully closed position
• In fully open position, since there is no reduction in flow section, the head loss is nearly zero
• Can be operated with lower torque Ratings
• Suitable to install actuator and gearbox
• Reduced bore alternative is available.(FAF1450 – Reduced bore PN40 Ball Valve for Gas)
APPLICATIONS
Natural Gas, Superheated Water, Steam, Fluids without acidity or alkalinity properties, LPG
TEMPERATURE