WAFER SWING CHECK VALVE / 2300
PN 16 DN25—DN400
PRODUCTION STANDARDS
| Design | TS EN 14341 |
| End Connection | WAFER TİP TS EN 1092-1 / ISO 7005-1 |
| Face to Face | TS EN 558 Seri 97 |
| Test | TS EN 12266-1 |
| Marking | TS EN 19 |
FEATURES
• FAF2300 Wafer type Check Valve, while allowing the flow moving to the desired flow direction, stops the flow when exposed to backflow
• The disc hinged on the body is placed within the flow section
• With the start of movement at defined flow direction on the system, the disc leaves the flow section by turning in its axis and allows the flow pass
• When the flow stops, the disc sits on the EPDM sealing rings placed on the body through disc spring force and maintains %100 tight sealing
• Deigned to maintain the minimum head loss on the pipeline
• Through its short installation length and eye screw (hook), easy to install between two flanges
• Body can be made of galvanized carbon steel (FAF2330) or stainless steel (FAF2300). Disc is made of 1.4301/AISI 304 stainless steel for both types
• Can be installed in horizontal or vertical position
APPLICATIONS
Steam, Hot Water, Cold Water, Fluids without acidity or alkalinity properties, Pressurized Air
TEMPERATURE