FEATURES

•    FAF3750 Pneumatic Actuator is a control instrument maintains the automation feature in valve control through converting the power obtained from pressurized air installation to mechanical movement
•    Actuator selection is made based on actuator type, torque requirements and connection dimensions
•    Actuator connection dimensions are manufactured according to ISO 5211 standard
•    Pneumatic actuators are manufactured with aluminum extrusion body, stainless steel stem, NBR rubber sealing components
•    General working pressure is set to 6 bars
•    It is advised to receive support from FAF Valve technical staff while selecting actuators to be used with our valves
•    Pneumatic actuators are divided into two as quarter turn (90 degree) actuators and linear movement actuators
•    Quarter turn Pneumatic Actuators
•    Works through the linear movement of the piston inside the body converted to angular movement
•    On request, quarter turn pneumatic actuators can be manufactured with stroke adjusted (proportional)
•    It has two types; double acting or single acting (spring return)
•    Can be used with ball, butterfly and plug valves
•    Linear movement actuators, piston type pneumatic actuators
•    Works through the transfer of linear movement of the pneumatic piston exposed to pressure to the valve stem. Manufactured according to the stroke distance specified by valve type and feature
•    It has two types; double acting or single acting (spring return)
•    Can be used with gate and knife gate valves