1220 PN16 – FLANGED

PN 6-10 -16                        DN 40—DN 600

PRODUCTION STANDARDS

Design   TS 3148 / DIN3357
End Connection   FLANGED TS EN 1092-2 / ISO 7005-2
Face to Face   TS3148 Föy2 DN15. DN150

TS EN 558 Seri 14 / DIN3202 F4

DN200..DN250TS EN 558 Seri 27 / DIN3202 F5
Test   API 598
Marking   MSS SP-25

 

 

FEATURES

  • FAF 1220, PN 16 flanged ball valve is operating by a ball having a hole with the same size as the flow section, through the help of the stem, rotating quarter turn(90 degree) between teflon seats where the ball to be parallel or perpendicular to the flow axis.
  • Can be installed bidirectional.
  • Through the stainless steel belleville spring reinforced teflon (PTFE) seats, %100 tight sealing is achieved in lowest and highest pressure ratings.
  • The well accordance of teflon material with various flow types and its resistance to higher temperatures enables it to be used in wide range of applications.
  • Various ball(SS304, SS304L, SS316, SS316L) and body(cast iron, ductile iron, steel) material alternatives available.
  • It is appropriate to be used in fully open or fully closed position.
  • In fully open position, since there is no reduction in flow section, the head loss is nearly zero.
  • Can be operated with lower torque ratings.
  • Suitable to install actuator and gearbox

APPLICATIONS

  • Hot Water, Cold Water, Superheated Water, Low Pressure Steam, Fluids without acidity or alkalinity properties,

TEMPERATURE

  • +200 °C
Catalogue