1270 FULLY WELDED
PN 6-10 -16 DN 40—DN 600
PRODUCTION STANDARDS
|
End Connection
|
FAF 1270 WELDING END
TS EN 12627 FAF 1280 FLANGED TS EN 1092-1 / ISO 7005-1 |
| Face to Face | TS EN 12266-1 |
| Test | TS EN 19 |
FEATURES
-
FAF 1270, PN 16 fully welded ball valve is operating by a ball having a hole with the same size as the flow section, through the help of the stem, inside a body made by welding of 3 piece high pressure resistant steel pipes, rotating quarter turn(90 degree) between teflon seats where the ball to be parallel or perpendicular to the flow axis.
-
Smooth and flawless body binding is achieved through full automated welding machines.
-
No leakage is possible from the body due to non-mechanical type of assembly.
-
Through its single body design, the stress and elongation/compression on the pipeline due to high temperature differences effecting the valve performance is eliminated.
-
Can be manufactured with different stem lengths and extension spindles. Suitable for underground installation.
-
Suitable to install actuator and gearbox.
-
No maintenance needed, easy to install on the pipeline.
-
Welded type(FAF1270) and flanged type(FAF1280) alternatives are available.
-
Ease of insulation due to its pipe shaped body.
APPLICATIONS
Hot Water, Cold Water, Steam, Fluids without acidity or alkalinity properties
TEMPERATURE