2255 CHECK VALVE
CLASS 150/300/600 DN50 — DN600
PRODUCTION STANDARDS
Design | API 6D/ ASME B16.34 |
End Connection | ASME B16.5 |
Face to Face | ASME B16.10 |
Test | API 6D/API 598 |
Marking |
API 6D |
FEATURES
• FAF2255 Swing Check Valve, while allowing the flow moving to the desired flow direction, stops the flow when exposed to back flow
• The disc hinged inside the body is placed within the flow section
• With the start of movement at defined flow direction on the system, the disc leaves the flow section by turning in its axis and allows the flow pass
• When the flow stops, the disc sits on the machined sealing seat through its own weight and maintains %100 tight sealing
• Designed and manufactured according to ANSI standard
• It has cast steel body and disc, sealing surfaces are manufactured from brass or stainless steel
• Head loss is lower compared to other type of check valves
APPLICATIONS
Steam, Hot Water, Cold Water, Potable Water, Superheated Water, Gas Networks, Chemicals, Pressurized Air
TEMPERATURE