1100 PN10/16 – FLANGED

PN 6-10 -16                        DN 40—DN 600

PRODUCTION STANDARDS

Design   TS 3148 / DIN3357
End Connection   FLANGED TS EN 1092-2 / ISO 7005-2
Face to Face   TS3148 Föy2 DN15
Test   DN200 DN250 TS EN 558 Seri 27 / DIN3202 F5

Marking

  TS EN 12266-1
FEATURES
  • FAF 1100, PN10-16 flanged ball valve is operating by a ball having a hole with the same size as the flow section, through the help of the stem, rotating quarter turn (90 degree) between teflon seats where the ball to be parallel or perpendicular to the flow axis.
  • Can be installed bidirectional.
  • Through the stainless steel belleville spring reinforced teflon (PTFE) seats, %100 tight sealing is achieved in lowest and highest pressure ratings.
  • The well accordance of teflon material with various flow types and its resistance to higher temperatures enables it to be used in wide range of applications.
  • It has stainless steel ball and cast iron body.
  • It is appropriate to be used in fully open or fully closed position.
  • In fully open position, since there is no reduction in flow section, the head loss is nearly zero.
  • Can be operated with lower torque ratings.
  • Suitable to install actuator and gearbox.
  • Reduced bore alternative is available.(FAF1150 – Reduced bore PN10-16 Ball Valve)

APPLICATIONS

  • Hot Water, Cold Water, Low Pressure Steam, Fluids without acidity or alkalinity properties

TEMPERATURE

  • +200 °C